Knife Project 1 Day 1

Photos follow below the notes, more text will come later

General notes

I have been uncharacteristically patient in setting up my little 12x12 basement shop. My first experiences at my grinder some time back were very humbling, and my attention got diverted to other things.

I had some time off recently, and decided to get my shop back in order.

I'm jump starting the making of my first knife by challenging my younger son (14 years old) to make one along side me.

So, I had him sketch out a knife he thought he'd like to make, and we're each taking a 440C blank and working through the process on my Bader III grinder.

We're playing it by ear at this point, experimenting with different techniques. In addition to the belt grinder, I have a bench grinder, drill press, a mini-lathe, dust collector, and a Paragon heat treating furnace. I'd really like a metal cutting saw and a small mill < s >

We put in a couple of hours tonight, going from paper sketch, to template, to partially profiled... making photos of most of the steps. This was Joshua's very first time at the grinder... he did very nicely.

Click on small images for larger photos

DSCN9182.jpg
Joshua's original sketch
DSCN9187.jpg
Josh transfering sketch to oaktag for template
DSCN9189.jpg
Using scribe to punch pinholes through sketch onto oaktag
DSCN9192.jpg
Cutting along the template pinhole lines
DSCN9196.jpg
Oaktag template.  Next time, we'll be smoother and probably use some plastic instead
DSCN9197.jpg
Template and 440C blank
DSCN9198.jpg
Blank after some light sanding cleanup.. two blanks were prepared, one for each of us
DSCN9202.jpg
Blank painted with Dykem blue layout fluid.
DSCN9205.jpg
Dry in about 5 minutes, fluid makes the scribed template outline easier to see
DSCN9209.jpg
The Bader III 2"x60" belt grinder
DSCN9212.jpg DSCN9213.jpg
Shows water trap sitting atop dust collector barrel (attached to dust collector vacuum system)
DSCN9216.jpg
Yours truly at the grinder... forgot my dust mask!
DSCN9218.jpg DSCN9241.jpg
Josh at the grinder
DSCN9244.jpg DSCN9225.jpg DSCN9227.jpg
Josh working on the profile
DSCN9229.jpg
Partially profiled blank
DSCN9234.jpg
Using a drill to shape one of the smaller curves. 
DSCN9235.jpg
This was not my finest drilling... Done differently on the second blade
DSCN9236.jpg
Light filing cleans up the hole
DSCN9237.jpg More to come... stay tuned ...